Trying my sleeve for the wife 2
顯示更多
隱藏
Another fleshlight session for my wife
發佈者 BenLee38
Video Transcription
The pods will have a different formulation than the ones in the other one.
The grids are now called plates.
Workers stack them in cases alternating positive and negative, then drop them in tanks of sulfuric acid and charge.
The lead oxide and acid will paste toward the power.
After charging for 24 to 72 hours depending on the model, the plates will go to a machine that washes them three times to remove acid residue which is left with the lead.
The charging process blackens the plates which are now called dry charge plates.
The machine rinses each positive and last red line.
An insulation material separated by the glass, then the plastic envelope.
These cover each protected place for short circuits.
Workers stack the plates again in positive, negative, positive, negative.
This time though, each stack contains a specific number of 5 or 33 plates depending on the pattern model.
Each stack will become one cell.
A cell provides two volts of electricity.
Each plate has a tab.
The robotic machine cleans the tabs with a wire brush and a chemical solution called flux.
Then it dips the tabs in molten tin.
This tin coating will improve the bond when the solder attach again.
The robot rubs the tabs on a flux-induced brush to clean the surface once again.
...
- 823
- 03:36