Making a Clay Mould of his cock
顯示更多
隱藏
What I always wanted was to make a mould of his cock, it's our.1st attempt which didn't quite work but we will try again I can't wait to make my own dildo of his cock
發佈者 cumbuddys
Video Transcription
at the gate so the faster the gearbox turns the faster the cable turns the faster the
reader. Now it's really common that this cable can get gunged up and eventually can break
but there's a test that you can do that's really easy using a hand drill. Now if I simply
fit the drill on the end of a square drive like so and this car I'll reverse it so it
goes anti-clockwise and I reckon I can just about see the speedo gate from where I'm standing.
And then go for it and sure enough the speedo's working 60 miles an hour.
That's quite impressive for a hand drill. Now the good news is that tells me that from here
forward the system's fine and the problem is going to be from here backwards which really
only isolates it down to one part and that's that little angle driver that sits on the side of the
gearbox. That's a pain because it means dropping the gearbox. Using this lever bar I'm just going
to push the gearbox just to one side enough to slide out this little puppy here. Now this is
basically a tiny little gearbox it takes the drive here from inside the gearbox turns the corner 90
degrees and puts it into the cable. Now there's the problem you see the drive's moving nice and
smoothly but it's not moving here in fact you know this is locked solid something in here is
...
- 3,381
- 05:57